Coating solutions for intermittences
With a reversible nozzle that adapts to all applications
Simplified and optimised design
The applicators adapt in size to achieve the range and coating width required (maximum width of 1000 mm).
The applicator’s reversible nozzle allows it to be mounted in the optimal position for the production line, regardless of the coating direction.
It can be used with CN mid-speed modules or CN-HS high-speed modules for better performance and faster application speeds, thus adapting to any gluing need.
Quick and clean cut-off
High-speed cut-off system for a perfectly clean cut-off at the end of the application. It uses injector modules with differential pneumatic control.
It has very accurate cut-off even at high speeds.
With Pt100, Ni120 and NTC (R) technology for the temperature sensor.
It provides thermal stability and uniformity in the applicator-nozzle assembly.
There is also a shared (via air distributor) or independent pneumatic control version for each module.
All the models have the option of including a standard built-in filter.
Operating and maintenance
The internal parts are conveniently accessed from the side by removing the closing plate, making them easy to maintain and repair.
Download all documents relating to this product.
CRCN HS Applicator
CRCN MS Applicator
See more technical characteristics
|Working temperature||up to 200 ºC (392 ºF)|
|Heating power||depending on the configuration used|
|Max. working pressure||80 bar (1.160 psi)|
|Filter mess included||100 mesh (standard)|
|Max. Working Pressure||6 bar; dry, clean and non-lubricated|
|Intermittent speed *||Up to 4.800 cycles/min (CN module)|
Up to 9.000 cycles/min (CN-HS modules)
|Coating width||Up to 450mm in aluminum version|
From 450 to 1.000mm in steel version
|Applicator width||from 60 to 450mm (aluminum version)|
|Power suppy voltage||230 VAC, 50 Hz (from the melter unit)|
|Solenoid valve voltage||24 VDC|
|Temperature sensor||Ni120 or Pt100 – RTD ±0.5ºC (±1°F)|
(*) Depends on the type of adhesive.